Side-Power SP 200 TC Instruction Manual download pdf (Page 20)

Using the needle threader

Before using the needle threader, use the main power switch to turn

off the sewing machine.

Not doing so could cause an injury.

Caution

Use sewing machine needles No. 11/75 to 16/100 with the needle threader. *

(Needle No 14/90 is included when the sewing machine is purchased.)

The needle cannot be threaded if the thread is too thick for the needle. For details

on possible needle and thread combinations, refer to “Relationship between the

needle, thread and fabric, and adjusting the thread tension” on page 29.

Understanding the needle threader mechanism

Preparing to use the needle threader

Turn the pattern selection dial

to “6” (straight stitch).

Otherwise, the needle threader *

may not operate correctly and

the needle may not be threaded.

Raise the presser foot lever. Check that the thread has

been passed through the

needle thread guide.

Pattern selection

dial

Presser foot lever

Needle thread

guide

Lower

Turn the handwheel towards

yourself until the needle is in

its highest position.

If the needle is not in its *

highest position, the needle

cannot be threaded.

Needle

Guide

Hook

Turn

The hook is within the guide.

The hook passes through

the needle, catches the

thread, then pulls the thread

through the needle.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 54 55

No comments

Side-Power SP 200 TC Instruction Manual Page 20