Side-Power SP 200 TC Instruction Manual download pdf (Page 21)

Sewing preparations

Using the needle threader

While fully lowering the needle

threader lever, hook the thread

on the guide as shown in the

diagram.

Fully turn the needle threader

lever to the rear, and pull the

thread through the needle

threader slot.

Slowly return the needle threader

1

lever towards yourself as much

as possible.

Check that the thread has passed

2

through the eye of the needle.

Release the needle threader lever

3

while releasing the end of the

thread.

If the needle is not threaded, check *

that the needle has been raised to its

highest position, and then repeat the

procedure starting with step

Pull the thread loop that formed behind the needle, and then pull about

15 cm of thread to the rear.

Needle threader

lever

Guide

Needle threader slot

15 cm

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 54 55

No comments

Side-Power SP 200 TC Instruction Manual Page 21