Side-Power SP 200 TC Instruction Manual Page 23

  • Download
  • Add to my manuals
  • Print
  • Page
    / 55
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 22
2
23
Sewing preparations
Application of each stitch pattern
Before turning the pattern selection dial, use the main power switch
to turn off the sewing machine.
Not doing so could cause an injury.
Caution
Pattern
selection
dial No.
Application
Stitch length dial
(recommended
setting)
Presser foot
Buttonhole
0
-
4
(0.4~1)
Buttonhole
foot
5
Straight stitch
(left side)
0
-
4
(1~4)
Zigzag sewing
foot
6
Straight stitch
(center)
0
-
4
(1~4)
Zipper insertion
0
-
4
(2~4)
Zipper foot
7
Blind hem stitch
0
-
4
(1~2)
Blind stitch
foot
*
8
Decorative stitch
0
-
4
(1~4)
Zigzag sewing
foot
9
Stretch fabric blind
hem stitch
0
-
4
(1~2)
Blind stitch
foot
*
Turn the handwheel towards yourself to raise the needle to its highest position;
otherwise, the pattern and stitch length may not be correctly adjusted.
When sewing patterns 1 to 15
Turn the dial until the desired pattern
aligns with the mark above the dial.
Turn the stitch length dial until the desired
stitch length aligns with the mark above
the dial.
Pattern
selection
dial No.
Application
Stitch length dial
(recommended
setting)
Presser foot
10
Mending stitch
Thin fabric
overcasting
0
-
4
(1~2)
Zigzag sewing
foot
11
Decorative stitch
Overcasting
0
-
4
(1~2)
12
Decorative stitch
0
-
4
(1~2)
13
Decorative stitch
0
-
4
(1~2)
14
Zigzag stitch
(medium)
0
-
4
(0.5~2)
15
Zigzag stitch (large)
Overcasting
0
-
4
(1~4)
Overcasting
0
-
4
(1~4)
Overcasting
foot
*
Pattern
selection dial
Stitch
length dial
1
2
Do not turn the pattern selection dial while the needle is lowered.
Doing so could break the needle and cause an injury.
The stitch length can be set between 0 and 4. *
Since the recommended range differs depending
on the pattern, refer to the following table.
Included only with model XXX34C/SuperJ34 *
.
The zigzag sewing foot can also be used for 7, 9, 15.
The length
becomes
longer
The length
becomes
shorter
Mark above dial
Page view 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 54 55

Comments to this Manuals

No comments