Side-Power SP 200 TC Instruction Manual download pdf (Page 42)

At the tacking or the crease

that was ironed, fold back the

fabric so that wrong side faces

upward.

Sew overcasting along the edge of the fabric, and then fold the fabric as shown.

Tack or iron a crease 6 to 8 mm from the edge of the fabric. *

Blind hem stitching

In this sewing method the stitch cannot be seen on the front of the fabric.

(For details on changing the presser foot, refer to “Changing the presser

foot” on page 26.)

Wrong

side

Wrong

side

Right

side

Right

side

Fold

(tacking or crease)

Wrong side

Caution

Before changing the presser foot, use the main power switch to turn

off the sewing machine.

Not doing so could cause an injury.

Turn the handwheel towards yourself

until the needle is on the left side.

Needle on the left side

Zigzag sewing foot

Blind stitch foot

The blind stitch foot *

is only included with

model XXX34C/

SuperJ34.

1~2

Overcasting

Change to the zigzag sewing foot or the blind stitch foot.

Set the stitch length dial between “1” and “2”.

Tacking or crease

Overcasting

6 - 8 mm

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 54 55

No comments

Side-Power SP 200 TC Instruction Manual Page 42