Side-Power SP 200 TC Instruction Manual download pdf (Page 36)

1234

Buttonhole sewing

Buttonhole sewing to match the size of the button is possible.

For stretch fabric or thin fabric, it is recommended to use a stabilizer for a better

buttonhole finish.

Buttonhole foot

Center line

Buttonhole

size

3 mm

Button thickness

(Button diameter+button thickness+3mm)

Set the buttonhole size and

mark lines on the fabric.

Division line

Start line of sewing

Guide line

Align the buttonhole foot

division line closest to you

with the guide line, and lower

the presser foot to the start

line of sewing on the fabric.

Change to the buttonhole foot.

Set the stitch length dial between “0.4” and “1”.

Start line of

sewing

Center line

Before changing the presser foot, use the main power switch to turn

off the sewing machine.

Not doing so could cause an injury.

Caution

(For details on changing the presser foot, refer to “Changing the presser

foot” on page 26.)

0.4~1

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 54 55

No comments

Side-Power SP 200 TC Instruction Manual Page 36