Side-Power SP 200 TC Instruction Manual download pdf (Page 50)

Troubleshooting

What is the problem? Check the following possibilities before contacting the service

center for repair.

Trouble Cause Countermeasure Page

Machine

does not

work

The power plug is not

inserted

Connect the power plug

correctly

The main power switch has

been turned off

Turn on the sewing machine 12

Thread is tangled in the

hook, or there is a broken

needle in the hook

Clean the hook 44

The thread winding spindle

has been pushed to the right

Push the thread winding

spindle to the left

Machine very

noisy & very

slow

There is lint or fluff in the

hook or feed dog

Remove the lint or fluff from

the hook or feed dog

Needle

keeps

breaking

Needle incorrectly inserted

into the machine

Insert the needle correctly 28

The needle clamp screw is

loose

Firmly tighten the screw 28

The needle is too fine for the

fabric

Use the appropriate size

needle for the fabric

The upper thread tension is

too tight

Loosen the upper tension 35

The bobbin case is not in the

correct position

Put the bobbin case in the

correct position

Upper thread

keeps

Breaking

Machine is incorrectly

threaded

Rethread the sewing machine 16-19

The thread is tangled in the

bobbin case or hook

Remove the thread tangle and

clean the feed dog and hook

The upper thread tension is

too tight

Loosen the upper tension 35

The needle is bent or the

needle point is burred

Insert a new needle 28

The needle is incorrectly

inserted

Insert the needle correctly 28

The thread is a poor quality

thread

Use a good quality,

recommended thread

―

Lower

thread keeps

breaking

Lower thread is incorrectly

threaded

Rethread the bobbin case 16, 17

1 2 ... 45 46 47 48 49 50 51 52 53 54 55

Comments to this Manuals

No comments

Side-Power SP 200 TC Instruction Manual Page 50

Comments to this Manuals